Letter - UTStarcom F1000G Manual

5.4 Letter

Switch to Letter input method;
corner of the screen
1. Press
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears
For example: if you press
appear in turn:
- The letter just entered will be underlined. When the letter is
underlined, press
press the right soft
2. After you have entered the intended letter, press any othe
keypad to input the next letter. If the next letter and current letter share
the same key, press the left soft key
underline, and then enter the next letter or simply w t for one second
to input again. Press
a space
3. Enter symbols and spaces: After the underline disappears, press
to display the symbol list. Press
and then press the left soft key
to enter a space
4. When no letter is underlined, press
right soft key
press and hold the right soft key
press to switch input methods
~ to enter the corresponding letter labeled on the
to switch between upper and lower cases;
ke y
to confirm the current letter input and enter
(Clear) to delete th
will be displayed at the lower left
repeatedly, the following letters
(Clear) to delete the letter
(Ok) or
;
to highlight the intended symbol,
to enter the selected symbol. Press
to move the cursor; press the
e c haracter to the left of the cursor;
(Clear) to delete all characters;
Input Method
r key on the
to remove the
ai
69