Parksense Sensors; Parksense Display - Jeep Cherokee 2019 Owner's Manual

Hide thumbs Also See for Cherokee 2019:
Table of Contents

Advertisement

cluster display indicating the vehicle speed is too fast. The
system will become active again if the vehicle speed is
decreased to speeds less than approximately 6 mph
(9 km/h).

ParkSense Sensors

The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is within
the sensors' field of view. The sensors can detect obstacles
from approximately 12 inches (30 cm) up to 79 inches (200
cm) from the rear fascia/bumper in the horizontal direc-
tion, depending on the location, type and orientation of the
obstacle.

ParkSense Display

The ParkSense display is always shown in the instrument
cluster display as long as the vehicle is in REVERSE.
Park Assist Ready
The system will indicate a detected obstacle by showing a
single arc in the left and/or right rear regions based on the
obstacle's distance and location relative to the vehicle.
If an obstacle is detected in the left and/or right rear
region, the display will show a single arc in the left and/or
right rear region and the system will produce a tone. As the
vehicle moves closer to the obstacle, the display will show
the single arc moving closer to the vehicle and the tone will
change from a single 1/2 second tone to slow, to fast, to
continuous.
STARTING AND OPERATING 313
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents