Jeep Cherokee 2019 Owner's Manual page 557

Compass Calibration
NOTE:
Press "Compass Calibration" on the touchscreen to enter calibration. To start calibration of the compass, press the
"Yes" button on the touchscreen and complete one or more 360-degree turns (in an area free from large metal or
metallic objects). A message will appear on the touchscreen when the compass has been successfully calibrated.
Keep magnetic materials away from the rear view mirror, such as Mobile Phones, Laptops and Radar Detectors.
This is where the compass module is located, and it can cause interference with the compass sensor, and it may give
false readings.
Audio
After pressing the "Audio" button on the touchscreen, the
following settings will be available:
Setting Name
Balance/Fade
NOTE:
When in this display you may adjust the "Balance/Fade" of the audio by using the "Arrow" button on the touch-
screen to adjust the sound level from the front and rear or right and left side speakers. Press the "Center 'C' Button"
on the touchscreen to reset the balance and fade to the factory setting.
Selectable Options
Up Arrow Down Ar-
Button row Button
Start
Left Arrow Right Ar-
Button row Button
MULTIMEDIA 555
Center "C"
10
Button