Ignition Switch; Ignition Node Module (Ignm) - If Equipped; Keyless Enter-N-Go (Ignition) - If Equipped - Jeep Cherokee 2019 Owner's Manual

26 GETTING TO KNOW YOUR VEHICLE

IGNITION SWITCH

Ignition Node Module (IGNM) — If Equipped
The Ignition Node Module (IGNM) operates similar to an
ignition switch. It has four operating positions, three with
detents and one that is spring-loaded. The detent positions
are OFF, ACC, and ON/RUN. The START position is a
spring-loaded momentary contact position. When released
from the START position, the switch automatically returns
to the ON/RUN position.
Ignition Switch
1 — OFF
2 — ACC (Accessory)
3 — ON/RUN
4 — START
Keyless Enter-N-Go (Ignition) — If Equipped
This feature allows the driver to operate the ignition switch
with the push of a button as long as the key fob is in the
passenger compartment.
The push button ignition operating modes are OFF, ACC,
ON/RUN, and START.