Jeep Cherokee 2019 Owner's Manual page 483

SERVICING AND MAINTENANCE 481
Tire Terminology And Definitions
Term Definition
The vehicle B-Pillar is the structural member of the body located
B-Pillar
behind the front door.
Cold tire inflation pressure is defined as the tire pressure after the
Cold Tire Inflation Pressure
vehicle has not been driven for at least three hours, or driven less
than 1 mile (1.6 km) after sitting for a minimum of three hours.
Inflation pressure is measured in units of PSI (pounds per square
inch) or kPa (kilopascals).
The maximum inflation pressure is the maximum permissible cold
Maximum Inflation Pressure
tire inflation pressure for this tire. The maximum inflation pressure is
8
molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation pressure as
Recommended Cold Tire Inflation Pressure
shown on the tire placard.
A label permanently attached to the vehicle describing the vehicle's
Tire Placard
loading capacity, the original equipment tire sizes and the
recommended cold tire inflation pressures.