Liftgate; Opening - Jeep Cherokee 2019 Owner's Manual

LIFTGATE

Opening

To Unlock/Open The Liftgate
The power liftgate may be opened by pushing the elec-
tronic liftgate release handle (refer to "Keyless Enter-N-Go
— Passive Entry" located in "Getting To Know Your
Vehicle") or by pushing the liftgate button on the key fob.
Push the liftgate button on the key fob twice within five
seconds to open the power liftgate. Once the liftgate is
open, pushing the button twice within five seconds a
second time will close the liftgate.
The power liftgate may also be opened or closed by
pushing the liftgate button located on the instrument panel
to right of the headlight control switch assembly. If the
liftgate is fully open, the liftgate can be closed by pushing
the liftgate button located on the left rear trim panel, near
the liftgate opening. If the liftgate is in motion, pushing the
liftgate button located on the left rear trim panel will
reverse the liftgate.
With a valid Passive Entry key fob within 5ft (1.5m) of the
liftgate, push the passive entry button located to the left of
liftgate release handle to open the liftgate with one fluid
motion.
GETTING TO KNOW YOUR VEHICLE 109
NOTE: If "Unlock All Doors 1st Press" is programmed in
Uconnect, all doors will unlock when you push the passive
entry button on the liftgate. If Unlock Driver Door 1st
Press is programmed in Uconnect, the liftgate will unlock
when you push the passive entry button on the liftgate.
Refer to "Uconnect Settings" in "Multimedia" for further
information.
Liftgate Entry
1 — Passive Entry Button
2 — Liftgate Release Handle
3