13. With the trolley carriage toward the operator, slide the trolley onto the beam.
14. Reinstall the trolley stop bolt previously removed through the beam and secure with the nut previously
removed.
NOTE:
15. Roll an average size tire/wheel assembly onto the trolley.
16. Lift the lift control handle "up" to move the lifting beam and trolley into position to slide the tire/wheel assembly
onto the spindle. Verify that the tire/wheel assembly is centered vertically on the spindle.
17. Slide the beam forward or backward to center the tire/wheel assembly on the spindle horizontally.
18. When the tire/wheel assembly is centered vertically and horizontally, securely tighten the four bolts attaching
the mounting flange to the attachment blocks.
For the trolley stop bolt to work properly, it must be installed from the inside
of the beam and the nut located on the backside of the beam.
16
TROLLEY
CARRIAGE
GROOVED ROLLER
TROLLEY BOLT
FLAT ROLLER
TIRE/WHEEL
ASSEMBLY CENTERED
VERTICALLY ON
SPINDLE
SPINDLE