Fm Operation; Searching For A Station Manually; Searching For A Station Automatically; Selecting Mono / Stereo - Sandstrom SHFGLC11 Instruction Manual

FM Operation

During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION button
on the remote control repeatedly to the TUNER mode to select a FM station.

Searching for a Station Manually

• To tune for weak station, tap the SKIP/TUNE SEARCH
buttons on the remote control continuously until you reach the correct frequency or
the reception is at its best.

Searching for a Station Automatically

• Tap and hold the SKIP/TUNE SEARCH
buttons on the remote control until the tuner starts reverse/forward searching for a
station. After tuning into a station, the search stops.
• The search may not stop at a station with a very weak signal.

Selecting Mono / Stereo

This unit can receive the FM mode only.
• Press the DISPLAY button repeatedly on the unit or the remote control to select FM stereo/
mono mode. The "
Select mono mode is helpful when receiving poor signal reception.
" indicator will show on the display in stereo signals reception.
icons on the unit or press the
icons on the unit or press and hold the
25