Memory Card Operation; Aux Operation - Sandstrom SHFGLC11 Instruction Manual

Memory Card Operation

During POWER ON mode, connect a SD card to the MEMORY CARD port directly.
1.
Tap the FUNCTION icon on the unit or press the FUNCTION button on the remote
2.
control repeatedly to select CARD mode.
3. If no memory card is connected, "NO CARD" will show on the display.
4. The unit will search for all available MP3/WMA files, and start playback automatically.
5. Press the PRESET/FOLDER
folder.
Tap the SKIP/TUNE SEARCH
6.
remote control to select a MP3/WMA file number.
• The unit can only playback MP3 and WMA file formats in CARD operation.
• The unit can support SDHC memory cards with up to 32GB of memory.
• The unit cannot play WMA files with protection by "DRM FILE".

AUX Operation

There is a LINE IN socket located at the rear side of the unit. Analogue audio sound signals from
other sources can be input to the unit through this socket.
1. Connect the LINE IN socket to another audio device with a LINE IN socket using a 3.5mm
stereo cable (not included).
2. During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION
button on the remote control repeatedly to select the AUX Input function until "AUX"
shows on the display.
3. Tap the VOLUME +/– icons on the unit or press the VOLUME +/– buttons on the remote
control to adjust the volume control for your desired sound output level.
4. In AUX mode, operate your audio device directly for playback features.
Make sure all connections are removed from the sockets before switching off the power
or withdrawing the mains plug from the mains socket.
buttons on the remote control to select the desired
icons on the unit or press the buttons on the
21