Sandstrom S40IP13E Instruction Manual

Instruction Manual
GB
HiFi system with dock for iPhone/ iPod/ iPad
Thank you
for purchasing your new Sandstrøm Hi-Fi.
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for future reference.
1
Unpacking
Remove all items from the packaging. Retain the packaging.
If you dispose of it please do so according to any local
regulations.
Main Unit Speakers x 2 Remote Control
FM USB DOCK MP3 LINK
AUX MODE A-B DIM
P-EQ LOUDNESS S-BASS DISPLAY
CLOCK PRESET SLEEP/TIMER
OK
MENU
Speaker FM Aerial x 1
Cable x 1
Instruction Manual Quick Start Guide
S40IP13E
2

Battery

Remove the insulating mylar strip
from the battery if the battery is
being used for the first time. It is
located at the bottom back side
of the remote control.
Battery Installation for the Remote Control
1. Unwind the screw and slide open
the battery compartment of the
remote control.
2. Remove the old battery, and place
a new battery (CR2025 Lithium
Battery) in the holder.
3. Close the battery compartment
cover and wind the screw back on.
3

Connections

1

Connecting the FM Aerial

Connect the FM wire aerial provided to the FM Aerial socket as illustrated below.
2

Speaker Connections

Connect the speaker cables at the back of the speakers to the speaker sockets (L/R) at the rear side of the unit.
3

Connecting to the Mains Supply

Insert the mains plug into a wall socket, and your system is ready to use.
Back View
AUX IN
FM
AERIAL
MP3-LINK
SPEAKER OUTPUT(6 )
1 Connecting the
FM Aerial
2
Please ensure mains cable is DISCONNECTED from the mains socket before connecting any cables.
• Reversing the steps by connecting the mains cable first may cause the unit to malfunction.
• During operation if the cables / wires require to be reconnected, the mains must be disconnected first. Otherwise damage may be caused to the unit.
4

Clock Setting

Displaying the Clock

Press the CLOCK button in any mode to display the clock.

Auto Setting the Clock

In TUNER mode, press and
hold the DISPLAY button.
The clock will automatically
FM USB DOCK MP3 LINK
update.
AUX MODE A-B
P-EQ LOUDNESS S-BASS DISPLAY

Manual Setting the Clock

CLOCK PRESET SLEEP/TIMER
1. In standby mode, press
and hold the CLOCK
OK
button, CLOCK SET will
be displayed and the
'24HR' will flash.
2. Press the VOL +/– to
select 24 or 12 hours,
then press CLOCK.
3. Press the VOL +/– to set
the hours, then press
CLOCK.
4. Press the VOL +/– to set
the minutes, then press
CLOCK.
Tip:
You will find that there are many exciting features available.
To get to know all these features, please take some time to read the instruction manual provided.
R
3 Connecting to the
Mains Supply
L
AV MAINS~
Speaker Connections
5

Basic Operation

Switching the unit On

Press the STANDBY button on the unit or on the remote
control to switch the unit on.

Selecting Modes

Press the FUNCTION button repeatedly to select TUNER,
DOCK, AUX-IN, MP3 LINK, BLUETOOTH or USB mode.
DIM
TUNER DOCK AUX-IN
USB BLUETOOTH MP3 LINK
You can also press the short-cut buttons on the remote
control ( , , , , ,
FM USB DOCK MP3 LINK
select your desired mode.
MENU
QSG-S40IP13E-130705V3-1
) to
AUX