Fm Radio Operation; Tuning In A Station; Program Radio Stations - Sandstrom VALVE SHBRDAB14 Instruction Manual

FM Radio Operation

• Make sure that you have correctly connected and fully extended the antenna.
• You can program a maximum of 20 FM radio stations.

Tuning in a Station

1. Turn the SOURCE dial on the unit or repeatedly press the FM/DAB button on the
remote control to select the tuner source.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the
down or up automatically until a station is found.
• Manual Tuning
Repeatedly press the
station you want.
• Preset Tuning (Available only after the stations are preset)
Repeatedly press the PRESET
desired preset number. Its band and frequency are displayed on the front panel.

Program radio stations

Automatically
•
Press and hold the PROGRAM button on the remote control for 2 second or more to
activate automatic program mode.
• "SCANNING" is displayed.
• All available stations are programmed.
• The first programmed radio station is broadcast automatically.
Manually
•
1. Tune to a radio station.
2. Press the PROGRAM button on the remote control to activate program mode.
• The preset number will blink.
Press the PRESET
3.
radio station.
If you select more than 20, the preset number will be changed to "1" automatically.
Press the PROGRAM button on the remote control again to store the station.
4.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset
number.
If the system is unplugged or if a power failure occurs, the preset stations will not be
erased.
/
buttons for one second or more, the frequency changes
/
buttons to change the frequency until you find the
/ buttons on the remote control to select the
/ buttons on the remote control to allocate a number to this
19