Adjusting The Volume; Clock Setting; Timer Clock Setting - Sandstrom SHFGLC11 Instruction Manual

Adjusting the Volume

Press the VOLUME +/– buttons on the unit or the remote control to increase/decrease the
volume.
Press the MUTE
flash and the audio output will temporarily stop. Press the MUTE
audio listening.

Clock Setting

Setting the clock can only be done in STANDBY mode.
When the unit is in STANDBY mode, the STANDBY LED indicator illuminates.
1. In STANDBY mode, Tap and hold the MODE Icon on the unit or press and hold the MODE
button on the remote control until the 24-hour indicator is flashing, then tap the SKIP/
TUNE SEARCH
control to select the 12-hour or 24-hour time format on the display.
Tap the MODE Icon on the unit or press the MODE button on the remote control to
2.
confirm, then the hour digits will flash.
3. Tap the SKIP/TUNE SEARCH
remote control to adjust the hour digits while flashing. Tap the MODE Icon on the unit
or press the MODE button on the remote control to confirm, then the minute digits will
flash.
Tap the SKIP/TUNE SEARCH
4.
remote control to adjust the minute digits while flashing.
5. Tap the MODE Icon on the unit or press the MODE button on the remote control to
confirm the time.
6. Each enable state will be cleared if any buttons are not pressed within 10 seconds.

Timer Clock Setting

Setting the timer clock in STANDBY mode.
Press and hold the TIMER button on the remote control until
1.
the " ON" indicator and "00:00" show on the display and the
hour digits flash.
Tap the SKIP/TUNE SEARCH
2.
press the
hour digits and then press the TIMER button on the remote
control to confirm. The minute digits will flash.
3. Tap the SKIP/TUNE SEARCH
press the
the minute digits and then press the TIMER button on the
remote control to confirm the TIMER ON time.
4. After adjusting "TIMER ON", " OFF" indicator will show on
the display and the hour digits flash.
5. Tap the SKIP/TUNE SEARCH
press the
hours digits and then press the TIMER button on the remote
control. The minute digits will flash.
14
button on the remote control to switch the sound off. The volume level will
Icons on the unit or press the
buttons on the remote control to adjust the
buttons on the remote control to adjust
buttons on the remote control to adjust the
Icons on the unit or press the
Icons on the unit or press the
icons on the unit or
icons on the unit or
icons on the unit or
button again to resume
buttons on the remote
buttons on the
buttons on the