Ipod Operation; Inserting The Ipod And Selecting Ipod Mode - Sandstrom SHFGLC11 Instruction Manual

iPod Operation

Using the iPhone/iPod dock you can play music files stored on your iPhone/iPod through the
stereo speakers.

Inserting the iPod and Selecting iPod Mode

This unit can support iPhone 3G/3GS/4 and various models of iPod players with 30-pin
dock connectors, such as iPod touch 1st/2nd/3rd/4th Generation, iPod Classic, iPod nano
1st/2nd/3rd/4th/5th/6th Generation, iPod 5th Generation (video), iPod 4th Generation (with
and without colour display) and iPod mini.
During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION
1.
button on the remote control repeatedly to select iPod mode. If there is no iPod/iPhone
connected, "NO IPOD" will show on the display.
Press the iPod OPEN/CLOSE button on the unit and the disc door will slide to the left
2.
automatically.
3. Press the
the iPhone/iPod docking by pulling downward.
Please mind your fingers when the disc
door closing.
4. Insert the Universal iPod dock adapter (not included) into the
iPhone/iPod dock until it sits firmly in place.
5. Connect the iPhone/iPod to the iPod connector inside the dock.
6. Press the
Press the iPod OPEN/CLOSE button on the unit to close
7.
the disc door
8. Tap the
ENTER button on the remote control to start playing.
• Your iPod will automatically start charging once it is docked.
• Switch off your iPod while listening to the radio to prevent signal interference.
• Use your iPhone/iPod controls to manually select your iPhone/iPod music menu, then
proceed to the next step.
22
button on the iPod compartment of the unit. A shaft will pop up and unload
button on the iPod compartment of the unit.
ENTER icon on the unit or press the
1) Press 1 time to release the ipod tray.
st
2) Insert iPod or iPhone.
3) Press 2 time to x the iPod or iPhone.
nd
4) Press 3 time to release the iPod tray.
rd
5) Take out the iPod or iPhone.
FUNCTION
MODE
ENTER
MENU
SKIP/TUME
SEARCH
Not Locked
Completely
Locked
Completely