Eco-Power/Standby Features; Sound Quality; Adjusting The Volume; Adjusting The Super Bass - Sandstrom SHFUSB10 Instruction Manual

ECO-Power/Standby Features

This unit features an ECO-Power/Standby mode. Press the STANDBY
button on the
remote control or on the unit to enter standby mode. To save energy consumption, the
clock will not be displayed.
If you want to display the clock during standby mode, you can press the CLOCK button.
The clock display will disappear after 90 seconds.

Sound Quality

Adjusting the Volume

To increase or decrease the volume, rotate the VOLUME + / – control on the CD player or
press the VOL + / – buttons on the remote control.

Adjusting the Super Bass

You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the S-BASS button on the remote control to get the effect. The "S-BASS" will show on
the display. Press the S-BASS button again to cancel the effect.

Control the Loudness

This unit has a loudness function. It can automatically increase the bass sound at low
volume (the higher the volume, the smaller the bass increase). Press the LOUDNESS button
on the remote control to obtain the loudness function. The "LOUD" will show on the display.

Preset Equalizer

You can adjust the sound reproduced by pressing the P-EQ button repeatedly.
Select from one of the 5 preset equalizer:
POPS JAZZ CLASSIC ROCK FLAT
Changing the Display Darkness
To dim or brighten the display, press the DIM button repeatedly on the remote control to
the desired brightness.
GB-13