Changing The Admin Password - iStorage diskAshur SSD User Manual

SSD

11. Changing the Admin Password

You can change the Admin Password by doing the following:
Note: If the LED indicator light flashes
less than 6 digits or more than 16 digits. Enter a password that contains 6 – 16 digits after
the LED indicator light flashes
1. If the LED indicator light flashes
go back to step 3. This is due to one of the following conditions:
• You waited longer than 10 seconds before entering a password.
• The new password was entered incorrectly.
2. If no activity is detected within two minutes in the Admin Mode, the diskAshur SSD will
return to the Standby Mode.
#10
®
1. Enter Admin Mode (refer to page 9 for details).
2. Press and hold + 9 until the LED indicator light flashes BLUE.
3. Enter the new password and press
of 6 digits and a maximum of 16 digits). The LED indicator light flashes
GREEN
three times. See note below if
4. Re-enter the new Admin Password and press
solid GREEN for two seconds and then solid
Password has been changed successfully.
BLUE
RED
(The Password must be a minimum
RED
LED indicator flashes three times.
. The LED indicator light stays
BLUE
RED three times, this indicates that the password is
intermittently.
intermittently and then BLUE
www.istorage-uk.com
indicating that the Admin
intermittently,