Messaging Settings - SENDO X User Manual

5

Messaging Settings

The Messaging feature has a range of different
settings, relating to the different message types. To
access these settings, press
main Messaging view, and select Settings, followed
by the settings type, e.g.
Settings for SMS messages
SMS (short) messages are delivered to your phone
through a message service centre, the number for
which is obtained from your service provider. You
can define more than one message centre and select
which one to use.
!
To add a new short message centre
1. From the Short message
Message centres.
2. Press Options
3. Enter a name for the service centre and press
g.
OK
4. Press the down joypad key ; then
enter the message service centre number.
g.
5. Press OK
6. To use the new message centre, press
twice to go back to the
view, select
new message centre from the list.
g from the
Options
Short message.
settings list, select
g and select
New msg.centre.
Select
Short message
Msg. centre in use, and select the
The full range of SMS settings is listed below:
Select this
Message
Centres
Msg. centre in
use
Receive report
Message
validity
Message sent
as
Preferred
connection
Reply via same
ctr.
A and
d
Back
settings
76
To
View the text message service centres that have
been defined, or add a new service centre.
Select which service centre is used to handle
your text messages.
Set to Yes to see the status of sent messages in
the Log.
Set a maximum amount of time allowed for a
message to reach a recipient. If the recipient
cannot be reached within the time, the
message is removed from the message service
centre.
Send a message as text, Email, fax, or paging.
These options may not all be available - check
with your service provider.
You can send SMS messages via the normal
GSM network, or via GPRS, if supported by the
network.
If set to Yes, when a recipient replies to your
message, the reply is sent using the same
message service centre. This may not be
possible between different operators.
Sendo X User Guide