Table of Contents
Advertisement
18
a twisting motion until you achieve a
comfortable fit.
3. Adjust the microphone so it aligns with your
mouth. Make sure that the headset speaker is
positioned correctly over your ear and that the
earloop does not cause discomfort.
Using your headset
!
To transfer to your headset
1. To transfer all audio features to your Bluetooth
headset, press the call control button on the
headset.
2. Accept the connection request (from your Sendo
Bluetooth headset) by pressing
headset indicator
of your phone's screen.
3. All sounds normally played through your
phone's speakers, will be played through the
headset only. This includes ring tones, alerts and
key sounds.
4. To transfer all audio features back to your
phone, either turn the headset off or turn your
Bluetooth connection off.
g. The
Yes
is now displayed at the top
!
To answer a call
1. To answer a call, wait for the headset to ring,
then press the call control button.
2. If the connection to your phone fails when
answering a call, you will hear two short tones.
Check the display on your phone to continue the
call.
3. During a call, the headset indicator light will
flash green, showing a call is in progress.
!
To end a call
1. To end a call, press the call control button at any
time during a call.
!
To make a call
1. To make a call, dial using your phone as you
would do normally. See
for details of making calls.
2. For voice dialling, press and hold the call control
button until you hear a short tone. This indicates
that the voice dialling feature is activated. When
prompted, say the voice tag or digits as
required. See
Voice dialling on Page 31
details of the voice dialling feature.
!
To adjust the headset volume
•
To increase the volume level, press the volume up
button.
•
To decrease the volume level, press the volume
down button.
•
When the maximum or minimum volume level is
reached, the headset sounds two short tones.
151
Phone Calls on Page 27
for
Sendo X User Guide
Advertisement
Table of Contents
