Table of Contents
Advertisement
3
Select this
Data bearer
Access point
name
Dial-up number
User name
Prompt password
Password
Authentication
Gateway IP
address
Homepage
To
Select the data connection type:
GSM data
- Standard GSM (Global System for
Mobile) data transmission.
High speed GSM
- High speed GSM (Global
System for Mobile) data transmission.
GPRS
- Faster data transmission service, for
which a fee will be charged.
Ensure that your service provider supports the
type of data connection that you are trying to
set up.
This is required to set up a connection to the
GPRS network. Obtain this from your service
provider.
Enter the modem telephone number of the
access point (for GSM data only).
Enter a user name. This may be needed to
access some services, and should be obtained
from the service provider.
Select
Yes
to be prompted for a new password
every time you make a data connection, or
to save the password entered on the phone.
Enter a password. This may be needed to
access some services, and should be obtained
from the service provider. Passwords are
usually case-sensitive. When you type in a
password, the characters that you have typed
are displayed very briefly, before being
replaced by asterisks (*), for security purposes.
To type a number in a password, press the
key and select
Insert
number.
Select Normal, or
Secure.
Enter the IP address of the browser gateway.
You can obtain this from your service provider.
Enter either the service address, or the address
of the multimedia messaging centre,
depending on the access point type required.
Select this
To
Connection
Select
security
for the connection. Check with your service
provider for more information.
Session mode
Select Permanent, or Temporary.
Data call type
(For GSM data only). Select from Analogue,
ISDN
are digital, and faster than an analogue
connection. However, you should check with
your Internet and network service provider(s)
whether ISDN connections are supported.
Maximum data
(For GSM data only). Set a maximum speed
speed
for data transmission - you can choose from a
range of values. Faster rates of data
transmission may cost more - check with your
service provider.
You can enter further, advanced data connection
settings, by pressing
Advanced
settings. The following advanced options
are available:
No
Select this
To
Phone IP address
The IP address of your phone. Contact
your Internet service provider to obtain IP
addresses.
Primary name
The IP address of the primary DNS
server
(Domain Name Service) server. A DNS is a
service that translates website names, e.g.
http://www.sendo.com, into IP addresses.
Edit
Second name
The IP address of a secondary DNS server.
server
Server number
Enter a number for the server.
Port number
Enter a number for the port.
Use PPP
If you select Yes, this may speed up data
compression
transfer. Contact your service provider for
more details.
46
Yes
to use Transport Layer Security (TLS)
v.110, or
ISDN
v.120. ISDN connections
g and selecting
Options
Sendo X User Guide
Advertisement
Table of Contents
