SENDO X User Manual page 63

4
!
To assign default numbers and addresses
1. Open the required contact card, or create a new
one, as shown above.
2. Press Options
3. Use the joypad to scroll to the field you want to
assign, for example
g.
Assign
4. Scroll through the list of numbers or addresses
shown, and highlight the one you want to set as
the default.
5. Press Select
z Note:
When you view the contact card again,
the default phone number, address, etc., which
you have set up will be underlined.
!
To add a thumbnail image to a contact card
1. Open the required contact card, or create a new
one, as shown above.
2. Press Options
3. Press Options
thumbnail.
4. The thumbnail images stored in your
Album will be displayed - use the joypad to scroll
through them and press
thumbnail to attach.
z Note:
When you have attached a thumbnail
image to a contact card, if that contact calls
your phone, the image will be displayed on the
Incoming Call screen next to the contact's
name.
g and select Defaults.
Phone number, and press
A.
g and select Edit.
g again and select
A to choose the
Select
!
To assign a ring tone to a contact card
1. Open the required contact card, or create a new
one, as shown above.
2. Press
3. A list of available ring tones will appear - scroll
to the one you want to choose, and press
A.
z Tip:
contact card, press
tone, then select
z Note:
contacts. See
contact has been assigned two different ring
tones, one individually, and one as part of a
contact group, whichever was assigned most
recently will be used.
Add
Photo
58
g and select
Options
To remove an assigned ring tone from a
g and select
Options
Default tone
You can assign a ring tone to a group of
Creating Contact
Ring tone.
Select
Ring
from the list.
groups. If a
Sendo X User Guide