SENDO X User Manual page 56

3
To switch off all call barrings, press
select Cancel all
Change your barring password by pressing
g and selecting
Call divert settings
Use the call divert settings to set a phone number to
divert calls to, for example, your voice mailbox.
z Note:
Call divert is a network service - check
availability with your service provider.
When you open the call divert settings, a list of call
diversion options is displayed:
Select this
All voice calls
If busy
If not answered
If out of reach
If not available
All fax calls
All data calls
!
To set up a call divert
1. Open the Call divert settings.
Options
barrings.
Edit barrings passw.
To
Divert all incoming voice calls.
Divert incoming calls if a call is currently
active.
Divert incoming calls after the phone has rung
for a specified length of time. You can select a
time period you want to elapse before
diverting, from 5 to 30 seconds.
Divert incoming calls when the phone is
switched off, or out of network coverage.
Activate the above 3 diverts, i.e., divert
incoming calls if the phone is busy, if the call
isn't answered within a set amount of time, or
if the phone is out of network coverage.
Divert all fax calls.
Divert all data calls.
g and
2. Use the joypad to scroll to the call divert option
you want to activate.
Options 3. Press Options
4. Select whether you want calls to divert to a voice
mailbox, or another number. You will be asked
to enter the number using the numeric keypad.
Press OK
z Note:
status
or not.
!
To set cancel a call divert
1. Open the Call divert settings.
2. Use the joypad to scroll to the call divert option
you want to cancel.
3. Press Options
call diversion off, or
off all call diversions.
51
g and select
Activate.
when you have finished.
g and select
Press Options
to see whether a call diversion is activated
g and select
Cancel
Cancel all diverts
Sendo X User Guide
Check
to switch a
to switch