SENDO X User Manual page 7

1
z Tip:
You will have been supplied with a Quick
Start Guide with your Sendo X phone. This
guide provides simple step-by-step information
on getting started with your phone. Also, the
interactive tutorial (the Sendo X Experience) on
the Companion CD provides a demonstration
of the basic features of your phone.
Inserting the SIM card
1. Remove the back cover of the phone - press
down on the raised Sendo logo near the bottom
of the phone, slide the cover down and lift off.
2. Remove the SIM from its packaging as detailed
in the instructions provided with the SIM. Slide
the SIM into the socket, with the logo facing you
and the cutout towards the top of the phone (as
shown below). Make sure that the gold-coloured
contacts of the card are touching the contacts of
the phone.
z Note:
Keep all SIM cards out of small children's
reach. The SIM card is easily damaged by
scratches or bending, so be cautious when
inserting and removing the card.
3. Insert the battery with the label facing up. Align
the tabs at the top of the battery with the tabs on
the back of the phone. Slide into place and press
down.
If you need to remove the battery, ensure your phone
is switched off, pull the small tab at the bottom of the
phone and lift the battery out.
4. Replace the cover. Place the cover onto the back
of the phone and slide the cover into place
making sure the tabs click into place.
Charging the battery
You must charge the battery for at least 4 hours
before you use the phone for the first time. After this,
the battery will normally take around 2 to 3 hours to
charge.
1. Insert the connector on the charger lead into the
connector at the base of the phone.
2 Sendo X User Guide