SENDO X User Manual page 45

2
Setting a call cost limit
This feature enables you to set a maximum limit for
your outgoing call costs which cannot be exceeded.
If your accumulated calls do exceed this cost, you
will not be able to make any further calls (with the
exception of Emergency calls) until the call cost
counter is reset, or the call cost limit is changed or
switched off.
See Log settings
GPRS data counter
This allows you to check the amount of data (in
kilobytes) sent and received during packet data
(GPRS) connections.
z Note:
This service may not be available on your
phone. Contact your service provider if you are
unsure.
!
To view GPRS data counter
1. Open the Log.
2. Press Options
!
To reset the GPRS data counter
1. Open the Log.
2. Press Options
3. Select the counter(s) you want to clear
4. Press Select
z Note:
The GPRS counter reset feature may not
be available on your phone. Contact your
service provider for more information.
for more information.
g and select
GPRS
g and select
Clear
A.
General log
The Log
e.g. phone calls, Emails, text messages.
The details which the
or recipient's name and phone number, and the
service provider or access point.
z Note:
an event are stored for.
!
To filter the Log
1. Press
2. Select which type of filter you want to view, and
press
!
To clear the entire Log
1. Press
2. You will be prompted whether you want to
permanently clear the log details. Press
counter.
counters.
40
stores details of all communication events,
Log displays include the sender
You can choose how long the details of
g and select Filter.
Options
A.
Select
g and select
Options Clear log.
g.
Yes
Sendo X User Guide