Settings - SENDO S300 Manual

11

Settings

11
Languages
This menu allows you to change the
language of the phone.
Alarm clock
You can use your phone as an alarm clock.
Enter the Settings
Alarm. Set the alarm to
time (in 24hr format) when you require the
phone to ring. When it rings press
δ
, Off to switch it off, or
γ
, Snooze to stop the alarm for ten minutes.
The alarm will then sound again.
☛
Note: The alarm will sound even if the
phone is switched off. The phone will
power on but you will not be able to
receive or make calls. Once the alarm
finishes the phone will switch off.
Setting time and date
Go to Set date
the date and press
Go to Set time
the time in 24 hour format, Press
The date and time will be stored.
Auto redial
When this function is activated, the phone
will automatically redial a number when the
call attempt fails. If the other user's phone is
busy, the phone will wait a few seconds
γ
menu and press
On and enter the
γ
and press , Select. Enter
γ
, OK.
γ
and press , Select. Enter
γ
before each attempt, and then beep when it
succeeds.
Auto answer
This function is only applicable when certain
handsfree accessories (e.g., a personal
hands-free headset) are connected to the
,
phone. When you receive an incoming call
with this feature activated, the phone rings
three times before automatically accepting
the call.
Any key answer
When this function is activated, you can
answer an incoming call by pressing any
key, except
Security
Your PIN (Personal Identity Number) code is
a code which you can use to protect
unwanted users from using your phone. This
is the number that the phone asks for at
switch on.
PIN Code:
1 Activate PIN entry requirement at switch
, OK.
on (if your SIM card supports this).
2 Deactivate PIN entry requirement at
switch on (if your SIM card supports this).
3 Change PIN.
4 Change PIN2.
Some network services require a separate
security code. This code is the PIN2. This
24
δ
, Reject.