6. Data Output
Display
Press
key to bring up the MENU screen.
key to select "6.UTILITY", and press
Use
key to select "3.ANALOG OUTPUT", and press
Use
key.
<To select measurement item to output >
key to Select "1.OUTPUT SELECT", and press
Use
key to switch in the sequence of "CO", "CO2", "TMP."
Use
(Temperature) and "HUM." (Humidity).
Select the measurement item to output, and press
<To set output range>
key to select "2.", and press
Use
Use
key to select the output range, and press
<To save the setting>
key to select "3.SAVE INFO", and press
Use
save the setting.
* If pressing
key before completing the setting, you will return to
the MENU screen without that the changes are saved.
Procedure
key.
28
key.
key.
key.
key.
key to