Display Unit - AND HT-300CL Instruction Manual

Items that include a "○" mark are currently set values.
If the RE-ZERO key is pressed when a function settings item is being
displayed, the setting values can be changed.
To store setting value changes (at a setting display with the "○" mark
turned off), press the MODE key. After end
will be displayed.
Setting the Weighing Units to Use
The scale has the weighing units listed in the table below and the units to

be used only can be selected. Set the weighing units enabled or disabled
as appropriate.
There are three types of taels, HK general/Singapore tael, HK jewelry tael

and Taiwan tael. But one of them can be selected.
The order of units to be displayed is as in the table and it cannot be

changed.
・Display Unit .
・Press the RE-ZERO key to proceed to weighing unit selection settings.
MODE
RE-ZERO
・By repeatedly pressing the MODE key, the device stores weighing units
to be used after displaying
setting item.
：To select weighing units to be set.
：To enable or disable the units displayed.
Units that include a "○" mark are units to be used.
Example)
end
is displayed, the next item
"g" is available.
"g" is unavailable.
, and then it returns to a function
11