Screen Alignment; Turn On Screen; Power On And Off; Sleep Mode - Opticon PHL-5000 Series Quick Start Manual

Screen Alignment

When you use this Pocket PC for the first time or cold-boot it, system will
require you to do screen positioning. When the device doesn't respond
properly to screen taps, you can also redo screen positioning by following the
instructions in this section.
1. Tap on
and then Settings. On the
System tab, tap Screen to align the
screen.
2. Tap on the "Align Screen" button.
When the screen adjustment window
appears, use stylus to tap the center of
the cross (+) until the next cross
appears. Please follows the instructions
on screen to finish the rest of the
operations. Tap "ok" button to exit.

Turn on Screen

This product is designed to provide you power-save functions. When the
screen is off, you can turn the screen back on by pressing "Power" button on
the top right corner of the device.
If using backlight is desired, tap on
Backlight.

Power On and Off

Sleep Mode

1. Press the "Power" button on the top right corner of the device to enter Sleep
mode. During the Sleep mode, screen is off and some peripherals will enter
power-save mode. But the cell phone is still on stand-by.
2. Press "Power" button again to turn on the screen.
You can also tap on
to setup "automatically turn off the device" after being stand-by for a
period of time.
, Settings, System tab, and then
and then Settings. On the System tab, tap Power
10