Set Mode; Set Mode Programming; Set Mode Items; Scan Types - Icom IC-M1V Instruction Manual

8

SET MODE

SET mode programming

SET mode is used to change the condi-
tions of 10 transceiver functions: beep
tone function, weather alert function,
scan type
(normal/priority)
timer, auto scan function, auto watch,
automatic backlighting, power saver
function, self check function, voice
scrambler type and scrambling code.
When no optional voice scrambler unit
is installed, voice scrambler type and
scrambling code setting are not
• SET mode construction
Beep tone
Self check function
16
q Turn power OFF.
w While pushing [MONI], turn power
ON and continue pushing [MONI]
, scan resume
until emits beep.
• After beep emission, release [MONI].
• Set mode item at comment indicator and
condition at channel number readout are
displayed.
r Push [MONI] to select the desired
item, if necessary.
t Push [Y]/[Z] to select the desired
condition of the item.
y To exit SET mode, push [16].
• Turning power OFF, then ON again also
exits SET mode.
Weather alert
Scrambling Scan resume
code
Push
Scrambler
unit selection
Power save
Scan type
timer
Auto scan
Automatic backlighting

SET mode items

× Beep tone "BEEP"
You can select silent operation by turn-
ing beep tones OFF or you can have
confirmation beeps sound at the push
of a switch by turning beep tones ON.
The beep tone volume is linked with
[VOL].
Push
Beep ON
(default)
Push
Beep OFF