Icom IC-M1V Instruction Manual page 22

8
SET MODE
× Auto scan function
"AUTO SCAN"
While in standby, this function automat-
ically starts the desired scan (normal or
priority scan) 30 sec. after operation.
• "SCAN" appears when the function is
turned ON.
The transceiver has a power save
function but the power save function
does not function when the auto
scan function is in use.
Push
Auto scan
ON
Push
Auto scan
OFF (default)
Scrolls the channel
comment, "
18
× Automatic backlighting
"BACKLIGHT"
This function is convenient for nighttime
operation. The automatic backlighting
turns the backlighting ON when pushing
any key except for [PTT].
• The backlighting automatically turns OFF
5 sec. after operation.
• Push [MONI] to turn the backlighting ON
without changing the operating condition.
• The backlighting ON when entering SET
mode, regardless of this setting.
Push
Automaric
backlighting
ON (default)
Push
Automaric
backlighting
OFF
Scrolls the channel
comment, "
".
× Power save function
"POWER SAVE"
The power saver function reduces cur-
rent drain by deactivating the receiver
circuit for present intervals.
The power save function does not
function when the auto scan function
is in use.
Push
Power save
ON (default)
Push
Power save
OFF
Scrolls the channel
". comment, " ".