Panel Description - Icom IC-M1V Instruction Manual

t CHANNEL UP/DOWN SWITCHES [Y Y ]/[Z Z ]
Push either switch to change the operating channel. (p.
00)
Push either switch to change the setting during set
mode. (p. 00)
Checks tag channels or changes scanning direction dur-
ing scan. (p. 00)
y CHANNEL 16 SWITCH [16•9]
Selects channel 16 when pushed. (p. 00)
Selects the call channel when pushed for 2 sec. (p. 00)
Enters call channel write mode when the call channel is
selected and this switch is pushed for 5 sec. (p. 00)
u VOLUME CONTROL [VOL]
Turns power ON and adjusts the audio level. (p. 00)
i SQUELCH CONTROL [SQL]
Sets the squelch threshold level. (p. 00)
o CHANNEL/WEATHER CHANNEL SWITCH
[CH/WX•U/I/C]
Selects and toggles the regular channels and weather
channel when pushed momentarily. (pgs. 00, 00)
Selects one of 3 regular channels in sequence when
pushed for 2 sec. (p. 00)
• International, U.S.A. and Canadian channels are avail-
able for regular channels.

PANEL DESCRIPTION

!0 DUALWATCH/TRI-WATCH SWITCH [DW•TRI] (p. 00)
Starts dualwatch when pushed momentarily.
Starts tri-watch when pushed for 2 sec.
Stops dualwatch/tri-watch when either is activated.
Enters comment writing condition while pushing [MONI].
(p. 00)
!1 SCAN SWITCH [SCAN•TAG]
Starts and stops normal or priority scan when tag chan-
nels are programmed. (p. 12)
Sets the displayed channel as a tag (scanned) channel
or when pushed for 2 sec. (p. 12)
Activates an optional voice scrambler function while
pushing [MONI]. (p. 8)
Clears all tag channels in the selected regular channel
when pushed and tuning power ON. (p. 12)
!2 TRANSMIT POWER/LOCK SWITCH [H/L•LOCK]
Toggles high and low power (1 W) when pushed. (p. 7)
• Some channels are set to low power only.
While pushing [MONI], push this key to select extra low
power (500 mW). (p. 7)
Toggles the lock function ON and OFF when pushed for
2 sec. (p. 6)
!3 SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optional speaker-microphone. (p. 00)
2
3