Icom IC-R2500 Instruction Manual page 33

w Push [VFO/MR•S.MW] for 1 sec. to enter select memory
write mode.
• "!" indicator and the memory channel number blink.
Memory channel blinks
e Push [SET•SKIP] once to select "bAnk."
After [SET•SKIP]
released
MEMORY OPERATION
r Rotate [DIAL] to select the desired bank indicator to trans-
fer or erase.
• Push [ATT•PRIO] to toggle the bank or bank channel selection.
• Select "– –" indication when erasing the contents from the bank.
• Vacant bank channel numbers are only be displayed.
Bank selection
t Push and hold [VFO/MR•S.MW] for 1 sec. to program the
bank and return to regular memory mode.
y Repeat steps q to t for transferring or erasing an an-
other banks contents.
5
Bank channel selection
5
28