Tailstock Quill Specs; Installing Tooling; Positioning Tailstock; Using Quill - Grizzly G0776 Owner's Manual

Tailstock Quill Specs

Graduated Dial
Increments ................................................. 0.001"
One Full Revolution ................................... 0.100"
Increments on Quill
Inch ................................. 0"-4" in
Metric ....................0–102mm in 1mm Increments

Positioning Tailstock

1. Rotate tailstock lock lever clockwise (facing
machine) to unlock tailstock from bedways.
2. Slide tailstock to desired position by pushing
it along the bedways.
3.
Rotate tailstock lock lever counterclockwise
to lock tailstock against bedways.

Using Quill

1. Rotate quill lock lever clockwise to loosen
quill.
2.
Turn quill handwheel clockwise to move quill
toward spindle or counterclockwise to move it
away from spindle.
3. Rotate quill lock lever counterclockwise to
secure quill.
Model G0776 (Mfd. Since 7/14)

Installing Tooling

This tailstock uses a quill that accepts tapered
arbors and drill bits (see the Figures below for
examples).
⁄ " Increments
1
8
Figure 38. Example photos of inserting tools into
Solid
Open
Solid
End
End
End
Figure 37. Types of tapered arbors and tooling.
the tailstock.
Tang
Screw
End
-37-