3Com CoreBuilder 5000 User Manual page 53

The following output is an example of the SHOW COUNTER command
listing REPEATER statistics:
CB5000> show counter repeater fast_ethernet_1 module 3
Repeater Statistics for Module 3 on FAST_ETHER_1
-----------------------------------------------------------
Readable Frames
Readable Octets
Upper 32 Readable Octets
Runts
FCS Errors
Late Events
Short Events
Frames too Long
Very Long Events
Alignment Errors
Collisions
Data Rate Mismatches
Auto Partition Count
Isolates
Symbol Errors
Transmit Collisions
Choose the CLEAR COUNTERS command to reset all the statistic
counters to zero. If the maximum limit of a counter is reached, the
counter rolls over. Each error type is followed by the number of packets
received containing that error.
Clear counter starts at the time you issued the Clear Counter
command.
For more information on repeater statistics, refer to the
CoreBuilder 5000 Distributed Management Module User Guide.
Gathering Repeater Statistics
0
689000
142
0
0
0
0
0
0
0
0
0
0
0
0
(display at the module level only)
4-13