Show Counter Command - 3Com CoreBuilder 5000 User Manual

4-12 C
ONFIGURING THE
SHOW COUNTER
M
ODULE

Show Counter Command

This command provides you with detailed information on repeater
statistics at the time you enter the command.
Use the following command to view repeater statistics:
SHOW COUNTER REPEATER
Use the following command to view statistics on an isolated network:
SHOW COUNTER
Use the following command to show network, module, and port-level
repeater statistics:
REPEATER {fast_ethernet_1..._4, isolated} {module} {slot}
Both the MONITOR and SHOW COUNTER commands provide
information for ongoing network statistics. The MONITOR command
displays network statistics periodically at the time interval you specify in
the command. The SHOW COUNTER command displays repeater
statistics, at one time, since the last CLEAR COUNTER command.
{fast_ethernet_1..._4}
{isolated}
REPEATER {isolated} {module}
{port} {slot.port}