Installation - Olympus DP21 Instructions Manual

INFO display (PLAY)
File name (p. 33)
Date / Time
(p. 53)
Exposure time
(p. 34)
If the save destination is set to a network location, the INFO display may sometimes not show the number of
remaining image.

2-4 Installation

This section pertains only to the installation of the DP21 microscope digital camera.
For the installation of the combined microscope, camera adapter, etc., refer to their instruction manuals and install care-
fully.
2
1
Fig. 1
Image No.
Metering area Exposure
(p. 26) adjustment (p. 26)
1
Installing the Camera Head
Screw in the U-TV0.5XC-3 C-mount camera adapter @ into the mount
thread at the bottom of the camera head ². If you use a different C-
mount TV adapter, follow its instruction manual.
· As the photographed field is as shown below, use a camera adapter
having magnification of 0.5X to 1X. (If a 0.35X camera adapter is used, the
peripheral part of the image will be obscured.)
· If a C-mount TV adapter from other manufacturer than Olympus is used,
the optical performance of the system may not be manifested fully.
CAUTION
Recorded folder
name (p. 54)
Protect (p. 52)
Field number
22
Be careful in using other manufacturer's C-mount camera
adapter or C-mount lens
a
. Otherwise, the threaded section will hit the inside of the
b
camera head and cause damage to it.
SAL System
White balance (p. 33)
ISO speed (p. 30)
Image quality
(p. 30)
Zoom (p. 27)
(Fig. 1)
0.5X (FN 17.6)
1X (FN 8.8)
having a thread length over 4.5 mm
b
a
11