Olympus DP21 Instructions Manual page 50

Count
This function draws markings and serial numbers on the specified positions. Up to 50 markings can be displayed
simultaneously.
}Even after this measurement is exited or another measurement function is performed, the markings are displayed in order
of serial numbers unless they are erased.
Measurement target
When the SET/OK button is pressed (or
the mouse is left-clicked), the markings
and serial numbers are displayed.
Cross Line
This function measures the distance between the specified point and the origin point (image center).
Measurement target
The line connecting the specified point and
origin point and the cross lines are drawn, and
the distance between the two points is
displayed.
46
1. When is selected, pointer "
using the cursor buttons
2. Press the SHIFT button (or left-click the mouse if this is in use) on the points to
be counted.
3. To end measurement, press the SET/OK button or MENU button (if you are
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
1. When is selected, pointer "
using the cursor buttons
2. Press the SHIFT button (or left-click the mouse if this is in use) on the points
desired for the measurement. If you want to perform another Cross Line mea-
surement, press the SHIFT button on the desired points.
3. To end measurement, press the SET/OK button or MENU button (if you are
using the mouse, right-click it or left-click it on [END (MENU)] at the top right of
the screen).
" is displayed. The pointer can be moved
or the mouse.
" is displayed. The pointer can be moved
or the mouse.