Recording Function Setting/Operation (Rec); Operation Using The Hand Switch; Available Functions - Olympus DP21 Instructions Manual

2-6 Recording Function Setting/Operation (REC)

2-6-1 Operation using the hand switch

This section describes the method of operating the basic functions using the hand switch. The hand switch has buttons
to which the functions frequently used in microscope observation are assigned to facilitate the recording of clear images.
Fig. 20
Name
Exposure adjustment Modifies the exposure time set by AE
(AUTO mode) (Auto Exposure).
Exposure time setting Sets the exposure time by direct entry
(MANUAL mode) of the figure.
SPOT metering Switches the metering area between
normal (30%) and SPOT (1%).
AE lock Locks the exposure time set by AE
(Auto Exposure).
OTWB To reproduce optimum colors, image
a white object, measures the white
balance and stores the optimum white
balance for actual recording status in
the DP21.
Scrolling Scrolls the zoomed image.
1

Available Functions

The hand switch of the DP21 incorporates the following functions. For
details of each function, see the description in the applicable pages.
Function Buttons
To enter the exposure time directly,
press the MODE button to select the
REC MANUAL mode.
Select the metering area according to
the specimen. See p. 26 for details.
Set the entire live image white when
executing OTWB.
See p. 22 for details.
Scrolling of the image is also possible
by holding the SET/OK button instead
of the SHIFT button.
SAL System
Remark
25