Olympus DP21 Instructions Manual page 61

Network setting
The DP21 can access PCs on a network when the control box is connected to a LAN.
}The network setting should be performed by the network administrator.
}The keyboard and mouse should be connected for the network setting.
The network setting makes the following operations possible.
· Direct saving of recorded images in a networked PC.
· Playback of recorded images saved in a networked PC on the DP21. (Only the images recorded using the DP21
can be played back on it. Even when an image is recoded using the DP21, it may sometimes be unable to be
played if it has been edited on the PC.)
1
Fig. 32
Network connection method
1. Connect a LAN cable to the LAN cable connector @ of the control box.
2. Click on the [NETWORK] icon in the [Maintenance] window. The following [Net-
work Connection Setting] window will appear.
3. Enter the setting items (Member, IP address, DNS server name) by following the
instructions in the [Network Connection Setting] window.
}Enter the setting items according to the connection environment being used.
For details, consult your network administrator.
}The settings are not applied to the system unless the LAN cable is connected.
}It is not permitted to change the computer name (system name) of the DP21.
}When setting the network, it restarts automatically in order to reflect the setting
items to the system. It takes several minutes as it restarts twice. Do not turn the
power OFF or draw out AC adapter until it completes restarting.
}If the power is turned OFF by operating the control box (including restarting
when setting the network, etc.), you may not access to the network for first sev-
eral minutes after DP21 restarts.
This is due to that the network-related system settings are being continued after
DP21 starts. In this case, after DP21 starts, please wait for a few minutes prior to
using.
SAL System
57