Icom IC-M330 Instruction Manual page 55

Data Output
When receiving a DSC call from the station that is selected
in this setting, the transceiver outputs the DSC data to the
NMEA output port.
L You can send Distress calls despite of this setting.
AllStations:  F romanystation.
StationsList:  F romthestationsthatareenteredIndividual
IDorGroupIDontheMenuscreen.
OFF:  D oesnotoutputanyDSCdatafromthe
NMEA 0183 Output port.
Alarm Status
Set the alarm ON or OFF for each DSC related item.
• Safety
 A nalarmsoundswhenaSafetyDSCcallisreceived.
• Routine
 A nalarmsoundswhenaRoutineDSCcallisreceived.
(Default:Off) • Warning
 A nalarmsoundswhen:
-NoMMSIcodeisentered.
- T hepositiondatahasnotbeenreceivedfor2minutes
after turning ON the transceiver.
- T hereceivedpositiondatahasnotbeenupdatedfor10
minutes.
- T hereceivedpositiondatahasnotbeenupdatedfor4
hours.
- T hemanuallyenteredpositiondatahasnotbeenupdated
for 23.5 hours.
• Self-Terminate
 A nalarmsoundswhenduplicateDSCcallsarereceived.
• Self-Terminate
(Default:On)
 A nalarmsoundswhenduplicateDistresscallsare
received.
(Default:On)
• Discrete
 A nalarmsoundswhenalowerprioritycallisreceived
whilereceivingahighprioritycall.
CH 70 SQL Level
AdjusttheSquelchlevelforChannel70tobetween1and
10, or Open.
DSC OPERATION
(Default:On)
(Default:On)
(Default:On)
(Default:On)
 (Default:3)
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
43