Icom IC-M330 Instruction Manual page 62

8
MENUSCREEN
GPS
SelectsasatellitetobeusedforGPS(GlobalPositioning
System) to pinpoint the geographic location of your
transceiver anywhere in the world.
L This setting may not be usable, depending on the transceiver
version or presetting.
• GPS
TheGPS(GlobalPositioningSystem)ispermanentlyset
to ON.
• GLONASS
SelectswhetherornottousethedatafromtheGLONASS
(GLObal'nayaNAvigatsionnayaSputnikovayaSistema)
satellites.
• SBAS
TurnstheSBAS(SatelliteBasedAugmentationSystem)
functionONorOFF.
TheSBAStransmitssignalstocorrecterrors,and
improves accuracy and reliability in data received from
regularGNSSsatellites.WhenthisfunctionisON,youcan
use the corrected data.
50
D Radio Settings
Scan Type
The transceiver has 2 scan types. Select Normal Scan and
Priority Scan.
NormalScan: S cansallFavoritechannelsintheselected
PriorityScan: S equentiallyscansallFavoritechannels,
(AlwaysOn)
L The default setting differs, depending on the transceiver version.
(Default:On) Scan Timer
YoucanusetheScanTimertopause,ortoresumeafter5
seconds, when a signal is detected.
On: When a signal is detected on a channel, the scan
(Default:Off)
pausesfor5seconds,andthenresumes.Ifthe
signal disappears in less than 5 seconds, the scan
immediately resumes.
Off: When a signal is detected on a channel, the scan
pauses until the signal disappears, and then resumes.
Dual/Tri-watch
SelectDualwatchorTri-watch.
Dualwatch:  M onitorsChannel16whilereceivingon
Tri-watch:
L See page 17 for details.
channel group.
whilemonitoringChannel16.
(Default:Dualwatch)
another channel.
 M onitorsChannel16andtheCallchannel
while receiving on another channel.
(Default:—)
(Default:Off)