Entering The Atis Id (For Dutch And German Versions) - Icom IC-M330 Instruction Manual

3
PREPARATIONS
■ Entering the ATIS ID
The Automatic Transmitter Identification System (ATIS) ID
consists of 10 digits. You can enter the ID in the "ATIS ID
Input" item on the Menu screen.
This ID entering can be done only once. After entering,
it can be changed only by your dealer or distributor. If
your ATIS ID has already been entered, doing the steps
below is not necessary.
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼], or rotate [DIAL] to select "ATIS ID
Input," then push [ENT] to start entering.
• The "ATIS ID Input" screen is displayed.
3. Enter your ATIS ID.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] to enter the selected number.
• Select "←" or "→," or rotate [DIAL] to move the cursor.
8
(For Dutch and German versions)
4. Repeat step 3 to enter all 10 digits.
5. Push
• The "Confirmation" screen is displayed.
6. Enter your ATIS ID again to confirm.
7. Push
• When your ATIS ID is successfully entered, the screen
L You can check the ATIS ID in "Radio Info" on the Menu screen.
FIN to set the entered ID.
FIN to set the entered ID.
displays "ATIS ID Successfully Registered," and then enters
the operating screen.