Snapserver 210 Hardware Checklist - Overland Storage SnapServer 110 Configuration And Hardware Options Manual

SnapServer 210 Hardware Checklist

The checklist shows the required and optional hardware to install a SnapServer 210, and
indicates whether a component comes with the server or must be supplied by the customer.
Component Description
Z
Network and Ethernet Cables (1 per enclosure)
Power Required to connect the Ethernet port(s) to the network.
Z
External Power Supply and Cable to connect to server (1 per enclosure)
Z
Power Cables (3 per enclosure)
Required to connect between the power supply and the mains (1 US, 1 UK,
1 EU).
Z
Power Cord Retainer Clip
Attaches to the server to hold the power cord in place.
̌
Ethernet Switches
Use switches that support GbE.
̌
APC-Brand UPS Device(s) (optional)
SnapServers are designed to work with a USB-based or network-based, APC-
brand UPS. Visit the
̌
Backup USB 2.0 Cable
To attach a tape device via USB, you need a USB 2.0 cable.
̌
USB-Connected Tape Backup Device .
For a list of compatible tape drives/libraries, see the
̌
Printer USB 2.0 Cable
To attach a tape device via USB, you will need a USB 2.0 cable.
̌
USB-Connected Printer
APC Web site
Chapter 1 SnapServer and Expansion Array Hardware Components
SnapServer Hardware Checklists
for a listing of optimal APC models.
Bakbone support web site
11