Basic Hardware Shipped With Guardianos Snapservers - Overland Storage SnapServer 110 Configuration And Hardware Options Manual

Basic Hardware Shipped with GuardianOS SnapServers

In addition to the enclosures and disk drives, the SnapServer comes with the
following cables and components:
Component
Power Cables
Ethernet Cables
External Power Supply
Power Cord Retention Clip
Rack Mount Assemblies
Description
Three different power cables are provided for each power
supply. These cables comply with power supply
requirements of the following countries:
• United States
• United Kingdom
• Europe
All SnapServers except the SnapServer 110 and
SnapServer 210 have dual 10/100/1000 Ethernet ports.
Two Ethernet cables per SnapServer are supplied. The
SnapServer 110 and SnapServer 210 have a single
10/100/1000 Ethernet port, and one Ethernet cable is
supplied.
Note
Expansion arrays connect to a host SnapServer, not
directly to the network, and thus do not ship with Ethernet
cables.
The SnapServer 110 and SnapServer 210 include an
external power supply and three AC power cords (1 U.S.,
1 U.K., and 1 EU).
The SnapServer 110 and SnapServer 210 include a
retention clip that attaches to the rear of the unit to prevent
the power cord from becoming dislodged.
Mounting brackets or slide rail assemblies for installing the
server into a standard EIA rack come with every rack-
mountable SnapServer. See the next section, "Basic
Hardware To Be Acquired from Third-Party Vendors" for
additional requirements for your SnapServer or expansion
array.
Chapter 1 SnapServer and Expansion Array Hardware Components
Safety Precautions
3