Connecting Routers In Series - TESTO Saveris base Instruction Manual

8. Briefly press the connect key on the rear of the router.
If the LED on the front of the router flashes
•
•
see Connecting routers in series, page 53
Pos: 68 /TD/Erste Schritte/testo Saveris/Hardware erweitern/01 a Router einbinden/04 Router hinteinanderschalten @ 8\mod_1295275223441_79.docx @ 75773 @ 3 @ 1
5.11.1.5.

Connecting routers in series

✓ All routers are connected to the power supply and registered on
the Saveris base.
1. Under
Startup
- The welcome dialogue box for the startup wizard is displayed.
green, a radio link to the Saveris base exists.
red, no radio link to the Saveris base exists.
If no radio link exists after changing the location of the
probe and/or router, introduce a converter; see
"Integrating Saveris converter (optional)".
If you want to use probes in a router cascade, see
Starting up Ethernet probes, page 65
Max. three routers can be cascaded in series.
The measurement data of up to five radio probes can
be transmitted per router cascade to the Saveris base.
The wireless probes can be connected to any router in
the cascade.
A converter can be connected upstream of the router
cascade.
Start | All Programs
Wizard.
| Testo, click on Testo Saveris
5 First steps
53