Analog Coupler - TESTO Saveris base Instruction Manual

Designation
data
Display
adjustment data
Pos: 161 /TD/Produkt verwenden/testo Saveris/09 Einstellungen System/07 Analogkoppler @ 4\mod_1248704611882_79.docx @ 46423 @ 2 @ 1
6.9.5.

Analog coupler

Via this menu item you can change the power supply of the analog
coupler or reset a sum channel, for example.
With the radio analog coupler U1 the same information is shown
under the
Settings for the radio probe page 123).
With the Ethernet analog coupler U1E the same information is
shown under the
Ethernet probe (see Ethernet probes page 125).
1. Open the
- The settings of the selected probe are shown in the display
range.
Designation
Connection
Display
Explanation
of the probe from the adjustment
software.
Button for displaying the adjustment data
of the probe that has already been
imported.
Radio probe setting
Ethernet probe setting
Radio probe
|
Explanation
Output signal of the transmitter.
Display range of the physical unit.
entry as with the radio probe (see
entry as with the
Ethernet probe > Scaling
6 Using the product
entry.
127