Table of Contents
Advertisement
OPTIONAL ENAMEL PANELS
1. Unwrap the panels from the protective wrapping.
2. Remove the glass front if already installed (see manual).
3. Put the rear panel flat against the back of the unit.
4. Before installing the side panels, loosen the screws for the tabs enough
so that you can slide the tabs on to the screws easily but that the tabs are
secure. For the location of the side tab screws see Diagram 2.
Regency GFi350L Gas Fireplace Inbuilt
5. Slide the side panels into position and tighten the screw to secure the
tab - repeat to install panel on opposite side of unit.
6. Reinstall glass door (see manual).
installation
19
Advertisement
Table of Contents
