Table of Contents
Advertisement
installation
OPTIONAL MOCK FIREPLACE (ZERO CLEARANCE) INSTALLATION
Mock Fireplace (zero clearance) Kit Contents
3
Standoffs
2
Side brackets
STANDOFF ASSEMBLY
The top, side, rear and bottom standoffs are shipped in a flat position and
must be folded into shape and attached - see Diagram 1.
1. Remove the standoffs from the mock fireplace packaging.
2. Take each standoff and bend into the correct shape. Bend up at the bend
lines until the screw holes in the standoff and the pre-punched screw holes
on the unit line up.
Diagram 2
10
Diagram 1
3. Install left and right nailing brackets. Remove existing screws from the
outside of the unit - line up bracket with holes in the unit and secure with
2 removed screws.
See framing clearance dimensions in the installation manual.
Note: Side brackets can be adjusted between 13 mm to 38 mm. This
adjustment must be done before unit is moved into framed opening.
Diagram 3
Diagram 4
Regency GFi350L Gas Fireplace Inbuilt
Advertisement
Table of Contents
