Chapter 3 Using The Accessories; Attaching The Stylus Cord - Partner OT-200 User Manual

This chapter describes how to use the device accessories.
‡
‡
‡
‡
‡

Attaching the stylus cord

Refer to the following to attach the stylus cord.
1. Thread the small loop of the
stylus cord through the strap
eyelet on the stylus and pull the
other end of the cord through
the small loop until the cord is
¿UPO\ VHFXUHG
2. Thread the other small loop of
the stylus cord through the top
hand strap eyelet on the device
and use stylus pull the cord
through the small loop until the
FRUG LV ¿UPO\ VHFXUHG
USING THE ACCESSORIES
CHAPTER 3
41