G950 Controls; Pfd/Mfd Controls - Garmin G950 Pilot's Manual

SYSTEM OVERVIEW

1.5 G950 CONTROLS

The G950 controls have been designed to simplify operation of the system and minimize workload and the time
required to access sophisticated functionality. Controls are located on the PFD and MFD bezels, and the Audio
Panel. PFD and MFD controls and softkeys are discussed in this section. Audio Panel controls are described in
the Audio Panel and CNS section; see the Audio Panel and CNS Section for more information about NAV/COM
controls.

PFD/MFD CONTROLS

1 2 3
18
1
NAV VOL/ID Knob Turn to control NAV audio volume (shown in the NAV Frequency Box as a
2
NAV Frequency
Transfer Key
3 NAV Knob
4
Heading Knob
18
4 5
17
Figure 1-15 PFD/MFD Controls
percentage)
Press to toggle Morse code identifier audio ON/OFF
Transfers the standby and active NAV frequencies
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle light blue tuning box between NAV1 and NAV2
Turn to manually select a heading
Press to display a digital heading momentarily to the left of the HSI and synchronize
the Selected Heading to the and current heading
Garmin G950 Pilot's Guide for the Tecnam P2006T
6 7 8 9
13
10
11 14
12
15
16
190-01146-00 Rev. A