Garmin G950 Pilot's Manual page 190

FLIGHT MANAGEMENT
When navigating a direct-to, the G950 sets a direct great circle course to the selected destination. The course to
a destination can also be manually selected using the course field ('COURSE') on the Direct-to Window.
Selecting a manual direct-to course:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Highlight the course field.
3) Enter the desired course.
4) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
5) Press the ENT Key again to activate the direct-to.
Reselecting the direct course from the current position:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
3) Press the ENT Key again to activate the direct-to.
178
Figure 5-51 Direct-to Window - Cancelling Direct-to Navigation
Garmin G950 Pilot's Guide for the Tecnam P2006T
Page Menu
- Cancel Direct-To Navigation
190-01146-00 Rev. A