Garmin G950 Pilot's Manual page 207

ARRIVAL (STAR)
A Standard Terminal Arrival (STAR) is loaded at the destination airport in the flight plan. Only one arrival
can be loaded at a time in a flight plan. The route is defined by selection of an arrival, the transition waypoints,
and a runway.
Loading an arrival procedure into a stored flight plan:
1) Select a stored flight plan from the Flight Plan Catalog Page.
2) Press the EDIT Softkey; or press the MENU Key, select 'Edit Flight Plan', and press the ENT Key. The Stored
Flight Plan Page is displayed.
3) Press the LD STAR Softkey; or press the MENU Key, select "Load Arrival", and press the ENT Key. The Arrival
Loading Page is displayed.
4) Select an arrival. Press the ENT Key.
5) Select a transition for the selected arrival. Press the ENT Key.
6) Select a runway served by the selected arrival, if required. Press the ENT Key.
7) Press the ENT Key to load the selected arrival procedure.
190-01146-00 Rev. A
Figure 5-68 Arrival Loading Page - Selecting the Arrival
Garmin G950 Pilot's Guide for the Tecnam P2006T
FLIGHT MANAGEMENT
Destination Airport
Selected Arrival
Arrivals Available at KCOS
Selected Runway
Arrival Waypoint Sequence
Preview of
Selected Arrival
195